Tecfluid MC-01 Manual do Utilizador

Cod:E-MI-2151061 I Rev:1 1 INSTRUCTION MANUAL FOR THE MC-01 CONTROL UNIT TABLE OF CONTENTS 1 INSTALLATION...

Cod:E-MI-2151061 I Rev:1 106.2 Change of units of measurement In some cases we need to change the measurement units for batching, for example,

Cod:E-MI-2151061 I Rev:1 117.3 Auxiliary Inputs An optional input exists for a remote "RESET P" to start batching processes. This input

Cod:E-MI-2151061 I Rev:1 127.7 Dimensions WARRANTY Tecfluid S.A. GUARANTEES ALL ITS PRODUCTS FOR A PERIOD OF 12 MONTHS, maximum 18 mon

Cod:E-MI-2151061 I Rev:1 21 INSTALLATION 1.1 Mounting The MC-01 control instrument is housed in a DIN 96 x 96 type plastic case intended to be mou

Cod:E-MI-2151061 I Rev:1 31.3 Relay Connection The connector for the Relay is marked "RELAY 1A" (situated on the bottom left-hand side)

Cod:E-MI-2151061 I Rev:1 42 SETTING UP AND PROGRAMMING 2.1 Description of the front panel 1. Red LED power supply pilot light . 2. LCD Disp

Cod:E-MI-2151061 I Rev:1 52.2 Starting up When the mains supply is connected and the MC-01 has been previously programmed the selected normal work

Cod:E-MI-2151061 I Rev:1 62.4 Programming the 4 - 20 mA Output In the event that the MC-01 has a 4-20 mA output the following screens will appe

Cod:E-MI-2151061 I Rev:1 72.6 Selection of the normal working screen In this part of the programming sequence we select the screen that will appe

Cod:E-MI-2151061 I Rev:1 83.2 Batching From the "standby" screen, we press the "ON/OFF" [3] push-button to enter the normal

Cod:E-MI-2151061 I Rev:1 96 USEFUL EXAMPLES OF CALCULATIONS 6.1 Measurement error corrections The calibration of the mechanical flowmeters is ac